More Door Work

Well it was more door work. Had to trim up where the old hinge was in the door then weld in some plates to cover the gap, grind, fill with a little fiberglass, sand and then hit it with a little primer to see how it looks.
It takes a little more time on the A pillar to keep all the lines right and working in the smaller areas is a pain in the ass. I still have a good day on the passenger side and then I can move onto the drivers side to finish.
I also did a little more work on the rear deck lid to smooth out the relief cuts. I think a good week of work would almost do it to finish off the body so I can prime and paint it.